Controlling the synth is an Arturia Keystep, which has some nice arpeggiator abilities... and because I can't really play, you'll hear those a lot :-0
Showing posts with label diy synth. Show all posts
Showing posts with label diy synth. Show all posts
Saturday, 14 November 2020
$20 DIY Arduino Synth Example Sounds through Zoom CDR-70
Here's a video showing some of the sounds capable with the little Arduino synth. Without doubt the star of the show is the Zoom CDR-70 which massively enhances the depth of the sounds. The more cynical among you might think playing it through a FX pedal is cheating, but I only ever play through effects, so there.
Labels:
Arduino,
arturia keystep arp demo,
beginner music project,
diy synth,
hand made electronic music,
zoom cdr-70
Tuesday, 27 October 2020
MIDI controlled Arduino Synth DIY Guide Nearly Ready
Very soon I'll be publishing a complete guide to building the Arduino Midi Synth. It'll be a guide for beginners, showing you everything from uploading the code to Arduino, soldering the pots and building a case.
![]() |
| A nearly complete DIY Synth |
Saturday, 20 June 2020
Helios-One Arduino Synth - Part 3
**Update**
The full build guide is now available here:
**End of update**
So in the third part of the tutorial for our little synth, we'll add a LPF. We'll use two B10k pots, one for the Cut-off and one for the the resonance. The cut-off pot also has a 220 ohm resistor on it's ground lug. Here's how it should look now;
And how it looks on the breadboard;
It's actually turning into quite a nice expressive synth. Here's a link to the code;
Hopefully it should all be self-explanatory in the comments of the code. The Arduino analog pots return a value of 0 - 1023, but the mozzi filter only needs a value of 0 - 255. Originally I converted this using the map function, but then after reading through Arduino for Musicians by Brent Edstrom, I saw that it was quicker/less resource intensive to bit-shift the sum >>2. The original map function is still in the code (commented out)... I think I could hear an audible difference but I could just be going mad (the bit shift version was smoother?). Feel free to give it a try.
The part I struggled with was the updateAudio function... somehow you had to pass the output of the oscillator into the filter. I did this by wrapping the original code into a new char, then passing that into the filter. Take a look at the code, or even better compare it to the old V2 code. Playing with the mozzie examples, the Arduino book, and various other examples on the web, I managed to get it to work, but it would distort/cut out. So I added a resistor on the Cut-off pot, and also increased the bit shifting on the updateAudio function from 8 to 10. It's a bit quieter now, but still usable. We might end up adding an amp on the output to boost the signal, but we'll wait and see until it's finished.
Hopefully I shall have time to create part 4 soon... but I haven't actually figured out what to add and we're running out of analog inputs (our last two!). I think maybe an LFO...
Thanks!
Labels:
Arduino synth,
diy synth,
mozzi synth,
tutorial for beginners
Subscribe to:
Posts (Atom)


